pencil

Print, Prints and Printed- A Gallery of My Riso, Relief and Screen Prints

| Rolo

This week has been a fun one, we’ve done so much printmaking, including printing an unexpected one-page zine on Monday. I kept with my Lovecraftian theme and created a bestiary of his monsters, I was really happy with the designs I drew, but the finished zine did not go to plan at all. I think I rushed the background a bit and I hadn’t done risograph printing before, so despite having researched the process, I wasn’t entirely sure how it would work in practice. I drew my monster sketches in pencil and scribbled the background in pen, which in hindsight wasn’t the best idea because when it came to printing the zine, the background overpowered my illustrations and the risograph printed wasn’t able to pick up much of the detail of my pencil sketches so the final zine looks like a bit of a mess. It was a good learning exercise though, at least I know that next time I riso print, I need to make my line work bolder and the background needs to be done in a lighter tone to the foreground.

The zines were only the first part of printing we did on Monday, in the afternoon we went to the print workshop to make our screens for screen printing the 2nd of our designs. It cost £14 for the screens which is a bit on the high side for me because I’m having some money issues in the run up to Christmas, but after actually using the screen, I know it was a worthwhile investment because I can print that design as much as I want now and also change the screen and use the same frame for any other designs I make in the future. I managed to do a design that I am really happy with, it depicted one of Lovecraft’s monsters, a Mi-Go, perched over a power-plant and feeding off of its fumes. I chose to depict this because in Lovecraft lore, the Mi-Go awakens from its slumber when it gets warm and power plants heavily contribute to global warming. I wanted to show how horrible and horrific the world could be if it keeps heating up at the rate it is, using the Mi-go to depict the horrors of what life would be like in a scorching, desolate Earth. I’m once again not 100% certain if my illustration conveys the message that I want it to though, I know what it means, but I’m not convinced that other people will, they’d probably just a cool giant bug creature so when I do more designs this project I need to make the climate change and global warming message clearer, while still using Lovecraftian creatures so that I stick to the theme that I’ve chosen for this project.

  • Sketched in pencil, refined in Illustrator and finished in Photoshop.
  • I screen-printed this design on to 200gsm paper.
Relief printed with an acrylic block and ink and put through a roller press.

I had to send my first design back off to the wood workshop place to be re- laser cut because I made a mistake with the formatting when I send it off the first time (no surprises there) so some of my design was missing from the acrylic plate, this all got sorted by Thursday though so I managed to create a lot of prints of both of the designs. I’ll post photos of the prints next week once the ink has all dried. I’ve thoroughly enjoyed printing so far, I’m just not sure about risograph printing yet, probably because it is the one that went the worst for me. I totally get the appeal of risograph printing, it’s so easy to create a huge run of prints, I just haven’t quite figured out how to make the process work for me yet, hopefully over the weekend I’ll be able to create a design that works because we are creating an A3 riso-print on Monday. It’d be great if I had another design to add to my permanent print collection. I already have some ideas of what I’m going to depict, I plan on showing a modern polluted and poisoned world with buildings that everyone should be able to recognise, inspired by Lovecraft’s short story ‘The Colour Out of Space’, I’ll leave a link to the story on this post. I’m hoping that I can make my message clear this time, hopefully 3rd time’s the charm.

http://www.hplovecraft.com/writings/texts/fiction/cs.aspx

Achievement unlocked!

| Rolo
Mural painted by Iga Pencak for L&S Gifts in Wallsend.

I’m so happy with myself right now, I got a high merit (or a 2:1) on my first university project in almost a year!! I was so worried that I’d only get a pass, but all of the work I put into the Character Design project finally paid off. The mural that my girlfriend was commissioned to do got finished on time too and the woman commissioned her loved it, I was so happy that it worked out and the mural is now displayed in Wallsend, hopefully forever. I did struggle to get all of the research done on time and to be honest, I still have one form of printing to research so I am a little bit behind right now. I’ll catch up though, now that the mural is out of the way. I would love to get a distinction at the end of the course, the only reason I didn’t get one this time is because I had an idea of what Skaadi would look like from the start and I stuck with that design throughout the entire project. In the future I need to explore different designs and develop my characters and ideas more. I do struggle with this to be honest; I think too much about what I want to achieve and once I have a solid idea, I just stick to it. I really should sketch out multiple designs first and be a bit more adventurous with my development instead of just keeping my ideas exactly the same from start to finish.

First print design , 2b pencil on paper.

Since last week I’ve managed to finish researching all of the artists that were set to us by the tutors, including Hokusai, Liv Rainey-Smith and Jack Davis, and I’ve researched relief printing and risograph printing, all that’s left to do as far as the research goes is screen-print research, technically we we’re supposed to have finished this by now so I have made things a bit harder for myself but I’m not too worried; I like the writing and research side of things so it shouldn’t take me too long. As well as the research I’ve also completed my first design for printing, I opted to draw Cthulhu riding a plastic polluted Hokusai inspired wave, with a trident piercing a skull and water bottle at the moment the wave crashes over Big Ben. It sounds like a lot I know but I don’t know how else to put it, I chose to do this design because alike the Skaadi project where I made my design depict the Amazon Rainforest crisis, I wanted to make my designs this project convey some of the horrific issues that are facing our world today. I chose to depict the ongoing plastic pollution problem that is threatening our oceans because it is something that could and probably will wipe out much of our known world if we don’t do something about it. My design serves as a warning, with Cthulhu symbolising the horrors of pollution and the great wave that could flood the world if the ice caps continue to melt and the sea levels rise.

Initial print design idea. 2b pencil on paper. Inspired by Hokusai.

I struggled with designing this because I knew what I wanted to convey, I just didn’t know how, I’m not even sure if my final design is effective at getting the message across, my original sketch was far too derivative of Hokusai, it took me a couple of attempts to get something that I was happy with. Time was against me though and I had to settle with what I had, it’s not that I don’t like the design, it’s just missing something where the white space is. I guess can always paint over the design once it’s been printed or redo it in my own time, but the main thing is that the design has been sent off to the right place for it to be laser cut onto acrylic ready for printing. Speaking about sending the file off, I once again struggled with formatting my design correctly to be laser cut, my tutor told us how to do it but a lot of the information got lost to me in my head, I don’t know if it’s because he was throwing a lot of information at the class really fast, or because I wasn’t paying attention enough due to the fact I get anxious in clss. Either way, I need to work on my ability to format things, I keep meaning to take a notebook to class with me so that I can take notes on how to do these things, but ironically, I keep forgetting to do so. I will try to take a notebook next time because I am sick of feeling kind of stupid when I have to keep asking the tutors to help me send files to certain places to be marked or printed. I don’t see many other people needing help with this and to be perfectly honest, I don’t want to have to either. I think we are printing the design on Monday which I am looking forward to, it’d be good to finally have a design that I can print over and over again, it could be something that I end up selling on Etsy which would be nice. We’ve already been asked to create another design for a different form of printmaking that we’ll be doing soon, which is great because I’ll have a lot of reproduceable designs in the near future. I’m probably going to stick with the Lovecraftian take on modern day issues theme that I’ve started with the Cthulhu design, so I guess I’m going to need to look for a more obscure one of his creatures, I don’t want to only use Cthulhu in my designs. I love H.P. Lovecraft though, so the next weekend is going to be quite fun.